P & N
|
| Jan 2011
| P&N HSS Countersinks & Deburring
| For use in portable & pedestal drilling machines. For countersinking holes and deburring
metals. For cutting steel, tool steel, stainless steel, cast iron, brass & aluminium. Made in China.
| Features
| Countersinks
| - 90º three flute
- Countersinking screw holes
- Chamfering of tapping holesMade to DIN335 specifications
- Made from HSS
- Deburring Tools
- 90º cross hole
- For removing burs in metals
- Smooth cutting action
- Made from HSS
|
| Deburring
| - 90º cross hole
- For removing burs in metals
- Smooth cutting action
- Made from HSS
|
|
| | | Jan 2011
| P&N HSS Step Drills
| For use in sheet metal, aluminium, plastic & fibre glass. During drilling, the next step deburrs the previously drilled hole. Made in China.
| Features
| - Made from High Speed Steel
- Ideal for sheet metal without pre drilling
- Spiral Flute for reduced vibration and greater control through steps
- Fixed drilling steps
- Three flat shank suits 3-jaw chuck
|
| Helpful Hints
| - Use a centre punch to prevent drill from wandering
- Use Sutton Tools cutting fluid to increase tool life
|
|
| | | Dec 2010
| P&N Bi-Metal Holesaw Set 7 piece
| Produce accurate, round clean holes in steel and alloy sheets.
Holesaws are only suited for thin metal up to 1.5mm maximum thickness.
Holesaws are suitable for electrical installation work.
| Features
| - Made From HSS
- Spring loaded pilot drill for ejecting the work material
- 1/4” Hex Shank
|
| Helpful Hints
| - To ensure an accurate cut, punch a small mark in the centre of the desired hole. This will keep the pilot drill centred when you begin cutting.
- With a constant drill speed apply more pressure on hard materials and less pressure on soft materials.
- When cutting soft materials lift the holesaw out of the cutting channel frequently to clear chips.
- Use Sutton Tools Lubricating fluid to extend the life of the tool.
|
|
| | | Oct 2010
| P&N Carbide Burs - Imperial & Metric
| Carbide Burs - 1/4" Shank
For shaping or forming metal
For use in air & electric die grinders
| Features
| - Made from solid carbide (K30) Shank = S45C Steel
- The double cut bur allows for rapid stock removal in harder materials
- The chisel tooth pattern not only minimises tool chatter but reduces the chip to a granular shape, in most materials
- 1/4” (6.35mm) shank
|
| Helpful Hints
| - For use in air & electric die grinders, do not use in conventional electric drills as insufficient speed can cause breakage.
- Position bur in drive as close as possible to head of collet.
- Allow tool to do its own cutting - do not force the cut or use excessive pressure.
- Allow tool to be running at full speed before making contact with the work piece.
- If sparks are evident in use, either bur is dull and should be replaced or material is too hard.
|
| Safety
| Eye protection must be worn at and around bur application
Do not exceed maximum safe operating speed (see chart)
| 
|
| | | Oct 2010
| P&N Off Line Driver
| Features
| - Off Line magnetic bit holder
- For use with 25mm insert bits only
- ¼" hex body with black finish
- Shaft swivels to 20º angle
- 90mm length
- Stainless Steel Holder
- Aluminium sleeve
- ¼" hex shank
|
|
| | | July 2010
| P&N Rotary Rasps
| For cutting, shaping or forming timber, plastic & rubber
Hex shank allows operator to switch from one profile to another
quickly when used in conjunction with a P&N Quickbit Adaptor.
Made in Taiwan.
| Features
| - Made from Tool Steel
- Will not clog
- Hardened for long life
- Hex shank suits quick change adaptors
|
| Safety
| - DO not use in Die Grinders
- Ensure tool is fully inserted into the chuck during use
- Do not exceed maximum safe operating speed (see chart)
|
| | | June 2010
| P&N TCT Drill Countersink
| Drill screw pilot hole and countersink in one action.
For use in cement sheet, blue board, timber, plastic & abrasive materials
Hex shank allows operator to switch from Quickbit Screw pilot drill/countersink
to a screwdriver bit quickly when used in conjunction with a P&N Quickbit Adaptor.
Made in Taiwan.
| Features
| - Tungsten carbide tipped (TCT) countersink
- Includes multi-purpose drill bit
- Removable drill for easy replacement
- Stop collar made from Spring Steel
- Stop collar for accurate control of countersink depth
- Hex shank suits quick change adaptors
|
| Helpful Hints
| - Loosen grub-screw to adjust drill bit for different length screws.
- Do not use hammer action.
- Slide stop collar over countersink and tighten grub screw to secure
|
| | | April 2010
| Quickfit Arbors
| The strongest arbor in the market for heavy duty cutting, the new P&N Quickfit Arbor has been designed to assist in the quick location and fitment for the complete P&N range of Holesaw products.
| Features
| - Fully engages into the Holesaw quickly with one sliding action of the collar
- The drive pins self locate into the drive holes in the Holesaw
- Non slip rubber finger grip for ease of use
- Made from through hardened chrome alloy steel
- The QFP1 Arbor suits holesaws from 32mm up to 152mm
- The QFP2 Tandem Arbor enables existing holes (up to 140mm) to be made larger
- The QFP3 Set includes QFP1, QFP4, 3-1/4 pilot & 4-1/8 pilot drill
- With the use of the QFP4 Adaptor combined with the QFP1 Arbor, one arbor will fit all holesaw sizes
|
| Benefits
| - Will fit all standard type holesaws in the market (made to international thread pattern)
- No additional drive pins or extra bosses required
- Will fit into a standard 13 millimeter drill chuck
|
| | | April 2010
| Holesaw Sets
| P&N holesaws are Australian Made, to international thread pattern standards, and can be used either by hand in a power tool or by machine. The unique varied pitched cutting teeth are heat treated high speed steel and are suited to cut metal, wood and plastics.
| Features
| - Knock-out slots permit slug removal
- Manufactured to international patterns
- Vari-pitch teeth reduce harmonic vibration
- Depth of cut - 32mm
|
| Helpful Hints
| Cutting fluid must be used when cutting metals
Withdraw holesaw frequently to clear chips
Always secure material to be cut |
| | | Jan 2010
| Quickbit HSS Drill Sets 10 Piece Metric
(For metal, wood and plastic)
| Bright Finish
| - Designed for machine and hand held drilling in a wide range of ferrous & non-ferrous materials
|
| TiAIN Finish
| - Titanium Aluminium Nitride (TiAIN) designed for longer life of the tool and reduces the need for coolant
- Suitable for machine and hand held drilling in a wide range of ferrous & non-ferrous materials.
- Made in China
|
| Features
| Made of High Speed Steel
40o fast spiral flute for easier penetration and swarf removal
135o modified split points for fast drilling without centre punching
Hex shank suits quick change adaptors
|
| | | Jan 2010
| Quickbit Panel Drill Sets 5 Piece Metric
(For rivet drilling)
| Suitable for thin sheet metal. Made in China.
| Features
| - Made of High Speed Steel
- Hex shank suits quick change adaptors
|
| Helpful Hints
| - Use a moderate speed on you power drill, withdrawing the drill regularly to clear the flutes
|
|
| | | Jan 2010
| Quickbit Brad Point Drill Sets 5 & 10 Piece Metric
(For wood working applications)
| For use in furniture making, doweling, cabinetry, and other woodworking applications. Made in China.
| Features
| - Brad point tip provides accurate positioning for starting the hole
- Spur cutting edges reduces splintering and ensure a smooth, clean hole
- Wide flutes provide a fast, continuous flow of chips
- hex shank suits quick change adaptors
|
| Helpful Hints
| - Use a moderate speed on you power drill, withdrawing the drill regularly to clear the flutes
|
|
| | | Dec 2009
| Diamond Core Bits - Extended Range
| Now cuts to ±0.2mm.
Diamond Tile Core bits have diamond encrusting to cut through glazed and polished porcelain, sandstone, terracotta and ceramics.
Suitable for tiling, plumbing, electrical, building trade and DIY handy person applications.
Made in China
| Helpful Hints
| - This product is for wet drilling only
- Always keep the drilling area wet
- Always use a slow continuous speed
- Never use the power tool on hammer setting
- To avoid drill slipping start drill at a 45º angle, and gradually straighten the power tool
- Drill bit may cut oversize
|
|
| |
|
| Dec 2009
| Holesaw - Electrician Set 10 Piece
| P&N holesaws are Australian Made, to international thread pattern standards, and can be used either by hand in a power tool or by machine. The unique varied pitched cutting teeth are heat treated high speed steel and are suited to cut metal, wood and plastics.
| Features
| - Knock-out slots permit slug removal
- Manufactured to international patterns
- Vari-pitch teeth reduce harmonic vibration
- Depth of cut - 32mm
|
| Helpful Hints
| - Cutting fluid must be used when cutting metals
- Withdraw holesaw frequently to clear chips
- Always secure material to be cut
|
|
| |
|
| Dec 2009
| Quickbit Changeable Drill
| For drilling metal, timber & plastic.
Hex shank allows operator to switch from Quickbit drill to a screwdriver bit quickly when used in conjunction with a P&N Quickbit Adaptor.
Made in Taiwan.
| Features
| - Made from High Speed Steel
- Removeable drill for easy replacement
- Hex shank suits quick change adaptors
|
| Helpful Hints
| - Ensure collet is tightened firmly to avoid drill bit slipping
- Turn collet anti-clockwise to loosen
- Use a moderate speed on your power drill, withdrawing the drill regularly to clear flutes
|
|
| |
|
| Dec 2009
| Quickbit Scew Pilot Drill / Countersink
| Drill screw pilot hole and countersink in once action.
Hex shank allows operator to switch from Quickbit Screw pilot/drill countersink to screwdriver bit quickly when used in conjunction with a P&N Quickbit Adaptor.
Made in Taiwan.
| Features
| - Made from High Speed Steel
- For drilling timber & plastic
- 82% countersink angle
- Hex shank suits quick change adaptors
|
| Helpful Hints
| - Loosen grub-screw to adjust drill bit for different length screws
|
|
| |
|
| Dec 2009
| Quickbit 3 Piece Power Adaptor Set
| Converts existing straight shank drills into hex shank to suit hex drivers.
Hex shank allows operator to switch from Quickbit drill to a screwdriver bit quickly when used in conjunction with a P&N Quickbit Adaptor.
Made in Taiwan.
| Features
| - Made from Spring Steel
- Securely grips the bit when the nut is tightened
- Hex shank suits quick change adaptors
|
|
| |
|
| Dec 2009
| Quickbit TCT Counterbore
| Tungsten carbide tipped counterbore with high speed steel drill for use in timber,plastic & abrasive materials.
Hex shank allows operator to switch from Quickbit Counterbore to a screwdriver bit quickly when used in conjunction with a P&N Quickbit Adaptor.
Made in Taiwan.
| Features
| - Tungsten carbide tipped counterbore
- Drill made from High Speed Steel
- Removable drill for easy replacement
- Hex shank suits quick change adaptors
|
| Helpful Hints
| - Use in conjuction with Quickbit Plug Cutter for a professional finish
|
|
| |
|
| Dec 2009
| Quickbit Plug Cutter
| For cutting plugs in timber.
Hex shank allows operator to switch from Quickbit Plug Cutter to a screwdriver bit quickly when used in conjunction with a P&N Quickbit Adaptor.
Made in Taiwan.
| Features
| - Made from Tool Steel
- Sharp clean-cutting
- Hardened for long life
- Hex shank suits quick change adaptors
|
| Helpful Hints
| - Use with pedestal drill
- Match wood grain to conceal screw of use contrasting wood for decorative look.
|
|
| |
|
| Aug 2009
| BlackMAX Drill Sets
| BlackMAX Drill Sets
New to P&N, these medium price-point drill sets are made in Australia to Sutton Tools specifications.
| Features
| - Made from HSS for DIY / Industrial use.
- Steam Oxide finish reduces chip build up on the cutting edge and is a better choice when drilling ferrous materials ie steels.
|
| Helpful Hints
| - Always apply firm consistent pressure
- Withdraw drill bit regularly to clear flutes
- Pilot holes for larger drill bits should not exceed 25% of the larger size as it can cause grabbing and breakage
- Drilling steels with sizes above 6mm (1/4”) drill bits should not exceed 1200 RPM
- Ensure chuck is tightened correctly to avoid slippage
- Tilting the drill bit after the hole has been started could cause the drill bit to break
|
|
| | | June 2009
| Quickbit Power Adaptor Set
| Features
| - Wobble Extension gives additional access in confined areas with 15º angle rotation.
- Wobble Square drive: 1/4”, 3/8” and 1/2”
- Heat treated and made with Chrome Vanadium steel.
- Spring loaded ball bearings hold sockets or extensions securely.
|
| | | May 2009
| Bulk Screwdriver Bits
| The P&N screwdriver bulk range is now available in new unique packaging
| Features
| - Individually wrapped and perforated in packs of 10
- Individually barcoded
- Individual part number and description on each pack
- In cardboard shipper branded and labeled
|
|
| | | April 2009
| Arbor Extension
| Product has been released to complement our extensive holesaw range for help with drilling deep holes or drilling in hard to reach areas.
Holesaw Arbor extension bar, made from hardened steel for use with hex shank arbors. Also supplied with allen key.
| Helpful Hints
| - Insert holesaw arbor shank into holesaw extension until holesaw arbor shank bottoms in extension
- Insert allen key provided into grubscrews (3) in holesaw arbor extension and turn clockwise until arbor shank is firmly secured in position
- Always secure material to be cut
- Never apply pressure in any direction except directly in line with holesawWithdraw holesaw frequently to clear chips
- Cutting fluid must be used when cutting metal
|
| | | Jan 2009
| Masonry Drill Bits - New & Improved Product
| Tradesman quality for rotary and percussion drilling. Product packaging is colour code marked to indicate the correct plug size. Ideal for use in natural and artificial stone, masonry brickwork and concrete. Tungsten carbide tipped for increased life. Suitable for all impact drills or rotary hammer drills fitted with a chuck.
| Features
| - Carbide percussion tip with semi positive profile for aggressive drilling in hard materials.
- Rolled double flute provides greater dust extraction extending drill life.
- Sandblasted finish.
- New packaging with clearer information.
|
| Environmental Statement
Diager and Sutton masonry drills are certified ISO 14001 for sustainable development.
These products contribute to environmental protection by a “sandblasted” surface treatment which guarantees zero heavy metals and by a protection called “without COV (Volatile Organic Compounds)” meeting the European directive 1999/13CE
|
| | | Jan 2009
| Screw Pilot Drill/Countersink
| New Packaging. This Product is now available in a double blister pack.
| Features
| - Drill screw pilot hole and countersink in one action.
- Hex shank allows operator to switch from Quickbit Screw pilot drill/countersink to a screwdriver bit quickly when used in conjunction with a P&N Quickbit Adaptor.
|
| Helpful Hints
| - Use the fast speed on your power drill, withdrawing the drill regularly to clear flutes.
- To replace pilot drill insert allen key in grubscrew and turn anti-clockwise. Insert new pilot drill and turn allen key clockwise until grub screw is firmly positioned on the pilot drill.
|
| | | Jan 2009
| Quickbit Self Centering
| The P&N Self Centering Drill Bits are ideal for drilling exact pilot holes in cabinet door hinges and door buts. The nosepiece bevel centers itself in the hardware’s countersink, applying pressure to the bit causes the nosepiece to retract, allowing the bit to drill a perfectly centered pilot hole.
| Features
| - Makes accurate pilot holes for hinges
- Adjustable drill depth
- Drill bits are easilly replaced by simply loosening the grub screw
- Spring loaded outer guide with chamfered head
|
| Helpful Hints
| - Use the fast speed on your power drill, withdrawing the drill regularly to clear flutes.
|
| | | Jan 2009
| Hex Screwdriver Bits
| This system is very popular in machine tools. The vertically sloping side walls of a HEX recess screw head prevent the cam out recess effect. Therefore less pressure is required as upward pulling forces are prevented. Also very popular for driving deck screws.
| Features
| - 1/4 inch Hex Shank
- AISI Impact and shatter resistant tool steel.
- Fits standard Quickbit Adaptor.
- Manufactured to DIN3126 Standard.
- Magnetic Tip.
|
| |
|
