HOME

Frost | Sutton Tools

Frost

July 2010
Frost 6 Piece Screwdriver Set

Features
VDE certified
Insulated to 1000V
Chrome vanadium Blades
Soft grip handle for increased comfort and torque
DOWNLOAD PDF
January 2010
Frost Tape Measure
The new Frost tape measure supersedes the previous model which was available in the Frost apprentice tool bags.

Features
  • Stainless steel blade for long life
  • 8m/27ft x 25mm
  • Comfortable non-slip rubber grip
  • Triple riveted end hook
  • Secure locking mechanism
  • Made in Taiwan

January 2010
Frost Drill Sets
  • The existing Frost drill sets sets are now available in new improved cases
  • Made from durable poly propelene
  • Utililising the latest styling
  • Includes hangsell tap for ease of display
  • Made in China

Features
  • Made from M2 high speed steel
  • For Drilling metal, wood and plastic

Helpful Hints
  • Always apply firm consistent pressure
  • Withdraw drill bit regularly to clear flutes
  • Pilot holes for larger drill bits should not exceeed 25% of the larger size as it can cause grabbing and breakage
  • Drilling steels with sizes above 6mm (1/4") drill bits should not exceed 1200 R.P.M
  • Ensure chuck is tightened correctly to avoid slippage
  • Tilting the drill after the hole has been started could cause the drill bit to break
DOWNLOAD PDF
June 2009
Frost Hand Tools
Introducing our brand new range of hand tools suitable for trade and the home handyman.

DOWNLOAD PDF
June 2009
Frost Spade Bits
The Spade Bit is a flat drill with angle spurs, which cuts much in the same way as a “W Point Drill”. One of the main advantages of these drills is that an extension shank can be added to their drill to increase its drilling length.

Features
  • Toughened Steel
  • Angled spurs for fast removal of debris

Helpful Hints
  • Keep constant pressure on the drill at all times when drilling to ensure the spade bit is cutting
  • The chiselled edge can be resharpened to ensure a cleaner, smoother hole
  • To minimise spade bit breakage and the risk of serious injury, always ensure the work piece is firmly clamped to the bench or secured to a fixture
  • Never apply pressure in any direction except directly in line with the spade bit
  • Never force tool by applying excessive feed pressure during use
DOWNLOAD PDF
Nov 2008
Panel Drill #30 Tupoint
Panel drills have been developed to drill holes for rivets in flat and curved panels and used in sheet metal fabrication. These drills are only recommended for shallow holes no deeper than 1.25 x diameter. When using twin-point drills always ensure that the chuck jaws are fully tightened.

Features
  • Made from M2 high speed steel
  • #30 size to suit 1/8” rivets
  • 135º modified point design
  • Fully tested and approved by Sutton R&D department
DOWNLOAD PDF
 
Powered by Komodo CMS